The Motorola X40 Pro, which is marketed as the Motorola Edge 40 Pro, is believed to launch in December 2022. OnLeaks has published 5K renders of this smartphone, along with a 360-degree video that shows off the design (as well as some specification details) quite neatly. The renders show the rear and front panels of the phone and indicate that we can expect a few design changes in this model.
OnLeaks and MySmartPrice have gotten together to share high-quality renders of the Motorola X40 Pro, and these indicate the new design changes we’ll see in the upcoming smartphone. On the rear panel, we can see a square-shaped camera module. The module houses three camera lenses along with an LED flash. The brand logo is placed at the centre of the rear panel.
Coming to the front panel, we can see a curved display (which is rumoured to measure 6.67 inches). The hole-punch cutout for the front camera is right at the centre top of the display. The volume rocker and power button are placed on the right spine of the smartphone. The bottom of the phone has a microphone cutout and a speaker grille. Additionally, we can see cutouts at the top edge of the smartphone too, and these may house the secondary microphone or speaker.
The Motorola X40 Pro measures 161.3 x 73.9 x 8.6-mm, while the bump on the camera module is 10.8-mm thick. We can expect to see a glass back on the phone, along with a metal frame (as opposed to the plastic frame the Motorola X30 Pro came with).
The Motorola X40 Pro will have a 6.67-inch OLED display with a 165Hz refresh rate. The display may have a Full HD+ resolution and an HDR10+ certification. The triple camera setup will sport a 50MP primary sensor, a 50MP ultrawide camera, and a 12MP telephoto camera. The smartphone will also have a 60MP front selfie.
Motorola’s flagship phone is rumoured to run on the new Snapdragon 8 Gen 2 SoC. The base model of this smartphone may offer 8GB RAM along with 128GB storage, while the second model will offer 12GB RAM and 256GB storage.
Motorola X40 Pro will have an IP68 rating, which means it will be dust and water-resistant. It will have a 5000mAh battery capacity with 68W fast charging support. It will run on MyUX 4.0, which is based on Android 13.
For more technology news, product reviews, sci-tech features and updates, keep reading Digit.in or head to our Google News page.
from Mobile Phones News https://ift.tt/qbFfvP2
via IFTTT
0 Comments